The ideal complement to the Rack Armour® Rack protection. The Rack Armour® collision protection systems are the perfect solution to end of aisle racking damage and protect the shelf in its entire width. They can also be used as separation barriers between driving and walking paths. The almost indestructible ballistic plastic outer skin (HDPE High Density Polyethylene) of the Rack Armour® collision protection systems is elastic, resilient, dimensionally stable and highly visible thanks to the highly fluorescent UV and weather resistant colour.
Single End Rail Barrier is the ideal solution for areas with hand-driven or low-traffic motorized forklift traffic. The single End barrier is able to take multiple impacts and reform to its original shape.
Product details:
- Height: 420 mm (including base plate)
- End post: Ø-180 mm
- Connecting Barrier tube: Ø-140 mm
- Base plate (WxLxH): 240 mm x 220 mm x 10 mm
- Standard length: 1.10 m and 2.40 m
Assembly takes place with above base plate fitted with ground anchors.
Double Rail Barrier Because of the two tubes the Double Rail Barrier is suitable for heavily used areas with intensive forklift traffic. Due to the height and signal colour, it also represents an optical warning effect.
Product details:
- Height: 620 mm (including base plate)
- End post: Ø-180 mm
- Connecting Barrier tubes: Ø-140 mm
- Base plate (WxLxH): 240 mm x 220 mm x 10 mm
- Standard length: 1.10 m and 2.40 m
Assembly takes place with above base plate fitted with ground anchors.
Single Bumper Barrier Due to its low center of gravity makes the Single Bumper Barrier is resilient to impacts which is also assisted by its cylindrical shape for deflecting vehicle. It offers therefore a wide variety of possible uses. It can be used as a plank protector for hall walls or as a separation barrier between driving and walking paths.
Product Details:
- Connecting Bumper tube: Ø-200 mm
- Base plate (WxLxH): 300 mm x 220 mm x 10 mm
- Standard length: 1.90 m (consisting of 2 x end posts + 1 connecting tube)
- Standard length: 1.90 m (consisting of 2 x end posts + 1 connecting tube)
Assembly takes place with above base plate fitted with ground anchors.
Double Bumper Barrier The Double Bumper Barrier was developed for heavily used areas with intensive traffic to provide a safe protection in the warehouse or also for outdoor area.
The product is also ideal for separating walking paths from driving ways or for protecting the hall walls.
Product details:
- Height: 620 mm (including base plate)
- Connecting Bumper tubes: Ø-200 mm
- Base plate (WxLxH): 300 mm x 220 mm x 10 mm
- Standard length: 1.90 m (consisting of 2 x end posts + 2 connecting tubes)
Assembly takes place with above base plate fitted with ground anchors.
The Rack Armour® Floor Rail Barrier is extremely popular with picking areas where fork lift trucks don’t operate, giving you a small yet extremely effective obstacle. Thanks to the innovative ballistics grade materials, the Floor Rail Barrier effectively absorbs impacts from any forklift traffic, thereby preventing damage to racking systems.
Product details:
- Height: 100 mm (including base plate)
- Width: 100 mm
- Standard length: 1.20 m
The stand alone Rack Armor® bollard is a cost effective solution to mark and protect corners and structures with minimal space intrusion. It is characterized by its resistance and impact resistance and can be used both indoors and outdoors. It effectively prevents collision damage and also provides a visual warning thanks to its signal color.
Product details:
- Possible Heights: 600/900/1,200 mm
- Bollard: Ø-200 mm
- Base plate (WxLxH): 240 x 220 mm x 10 mm
Assembly takes place with above base plate fitted with ground anchors.
Standard Pedestrian Barrier made from a tough HDPE this barrier variant is extremely resilient and visually striking, aiming in the first instant to be detected rather than hit. The Standard Pedestrian Barrier can be combined with the Rack Armor Gate system. The rails are therefore plugged in the swing gate posts.
Product details:
- Height: 1,180 mm (including base plate)
- Base plate (WxLxH): 200 mm x 200 mm x 10 mm
- Standard length: 1.50 m (consisting of 2 x end posts + 3 x handrails)
Assembly takes place with above base plate fitted with ground anchors.
Advantages of barriers:
- Simple and easy installation
- Protection of everyone in work environment
- Protection of work equipment
- Protection of infrastructure
- Technological advancement and significant cost reduction during exploitation
- Fully recyclable
- Modern flexible construction, viable for any kind of passageway protection. Every module is made from 3 profiles, available in 2 versionons.